Microscan QX Hawk Bedienungsanleitung PDF herunterladen (Seite 53)

QX Hawk Industrial Imager User Manual 3-9

Hardware Installation

Port Routing

The physical advantages created by flexible signal routing and switching are enhanced

further by Port Routing, which can be configured in ESP. Port Routing eliminates the

need for dedicated “Host” and “Aux” ports in a traditional sense. With Port Routing, any

port can be defined as a Host or Aux port. Port Routing also allows users to define the

data types that are accessible from specific ports.

The primary benefit of Port Routing is that any type of data can be routed to any port, and

can be sent through multiple ports simultaneously. Multiple types of data can also be

appended to the symbol data that is output from the imager to the host. Command data,

symbol data, extended data, and diagnostic data are enabled by default in the QX Hawk.

The table below lists different types of data, with examples for each data type.

The screen capture below (from ESP) shows the QX Hawk’s four communications ports

and the parameters for each.

Data Type Example

Command Data Serial commands; imager responses to serial commands.

Symbol Data Any string of data encoded in a symbol.

Extended Data Decodes per trigger, decode direction, configuration database index number.

Diagnostic Data Service message.

RS-232 A, RS-232 B, and RS-422 are serial. RS-232

A is always enabled. RS-232 B and RS-422 can be

enabled or disabled to match the physical requirements

of the application. Ethernet can also be enabled or

disabled as required.

RS-232 A, RS-232 B, and RS-422 can be configured

for Baud Rate, Parity, Stop Bits, Data Bits, Symbol

Data Output, Extended Data (Decodes Before Output,

Symbol Position Output, etc.), Diagnostics Output, and

External Source Processing Mode (Command or Data).

Ethernet can be configured for IP Address, Subnet

Mask, Gateway, IP Address Mode, Symbol Data Output,

Extended Data, Diagnostics Output, and External

Source Processing Mode.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 459 460

Keine Kommentare

Microscan QX Hawk Bedienungsanleitung Seite 53